Question
January 4, 2008 at 08:52 AM
openlyfurtive2all

Redirect a Remote-Port to an Internal or Remote-Port on the same system

by openlyfurtive2all . Updated 18 years, 10 months ago

FOR WINDOWS XP, 2000, etc.

There should be a simple way to redirect traffic sent from and application or from the system to an External TCP and/or UDP port to an Internal TCP and/or UPD port or to another External TCP and/or UDP port. I CANNOT/DO NOT want to do it through the application. But damned if I can find anyone who knows a way to do it without an external router, a firewall, or Linux OS.

HYPOTHETICAL EXAMPLE: An application is attempting to send a message to the internet over port 69. I need it to use port 999 in order for the traffic to use the proper network. But the application doesn’t allow me to edit the port that it sends through. I can’t change the router or firewall. Therefore I need to have the system to the traffic routing internally.

Any Thoughts??!!!!!!

Thank You In Advance!

This discussion is locked

All Comments